Sunny Beam Bluetooth® is showing “Update” on the display
(jh) If the Sunny Beam Bluetooth® is reset, the update file will be deleted.
This is necessary, however, if the Sunny Beam Bluetooth® has a fault and a Watchdog message has been issued.
- Connect the Sunny Beam Bluetooth® to the PC.
- Select ‘Service’ > ‘Update’ in the menu. (An additional drive identifier should now appear in Windows Explorer or a similar interface in other operating systems).
- Copy the update file (in the attachment) into the folder.
- Restart the Sunny Beam Bluetooth® by removing and re-inserting the batteries.
The message should now no longer appear.
You find the file at our homepage www.sma.de about the menue “Service & Support” > “Downloads” > “Archive” > “Monitoring Systems” > “Sunny Beam mit Bluetooth® (BEAM-BT)” > “Firmware” > “International”.