Sunny Portal / Webconnect: Thêm Và Thay Đổi Inverter

Adding Inverters

A Webconnect system in Sunny Portal can consist of a maximum of four inverters with Webconnect function. If your Webconnect system in Sunny Portal already consists of four inverters, you will need to create a new system in Sunny Portal.

Requirements:

• The new inverter must have Webconnect functionf.
• The new inverter must be commissioned in your system.
• The new inverter must be connected to the router/network switch and the Internet (see installation manual of the inverter with integrated Webconnect function or the installation manual of the retrofitted Speedwire/Webconnect interface).
• The PIC and RID of all inverters must be available (see inverter type label or sticker near the type label).
• You must have the user role Administrator.

Procedure:

1. Go to www.SunnyPortal.com.
2. Select [PV System Setup Assistant]. The PV System Setup Assistant opens.
3. Select [Next]. The page User Registration opens.
4. Enter the e-mail address and the Sunny Portal password in the fields E-mail Address and Password.
5. Select [Next]. The page Select PV system opens.
6. Select the option Add or replace devices.
7. In the system line and the column Option, select “+” and [Next]. The page Select devices opens.
8. Enter the PIC and RID of a new inverter in the fields PIC and RID.
9. Select [Identify].
10. To add more inverters, enter the PIC and RID of a further inverter and select [Identify].
11. Select [Next]. A summary is displayed.
12. Select [Finish].

Replacing an Inverter

Requirements:

• The new inverter must be of the same device type as the inverter to be replaced and be enabled for Webconnect function.
• The new inverter must be commissioned in your system.
• The new inverter must be connected to the router/network switch and the Internet (see installation manual of the inverter with integrated Webconnect function or the installation manual of the retrofitted Speedwire/Webconnect interface).
• The PIC and RID of the new inverter must be available (see inverter type label or sticker near the type label).
• You must have the user role Administrator.

Information:
Device replacement: do not delete the old inverter
If the inverter being replaced is deleted from Sunny Portal, all the data of that inverter will be irretrievably deleted from Sunny Portal.

• To retain the data of the old inverter in Sunny Portal, do not delete the old inverter.

Procedure:

1. Go to www.SunnyPortal.com.
2. Select [PV System Setup Assistant]. The PV System Setup Assistant opens.
3. Select [Next]. The page User Registration opens.
4. Enter the e-mail addressand the Sunny Portal passwordin the fields E-mail Address and Password.
5. Select [Next]. The page Select PV system opens.
6. Select the option Add or replace devices.
7. In the system line in which inverters are to be replaced, select  and [Next]. The page Select devices opens.
8. Enter the PIC and RID of a new inverter or a new Speedwire/Webconnect interface in the fields PIC and RID.
9. Select [Identify].
10. To add more inverters, enter the PIC and RID of a further inverter and select [Identify].
11. Select [Next]. The page Replace devices opens.
12. In the line of the old inverter, select the new inverter in the drop-down list Replace with.
13. Select [Next]. A summary is displayed.
14. Select [Finish].