Bỏ qua để tới nội dung chính

Hướng Dẫn Sử Dụng Sunny Webbox

With a Windows based computer that is already attached to the LAN with Internet Access fully functional do the following:

  1. Go to Start, Run and type ‘cmd’ in the ‘open:’ field
    A command line window will appear (keep this window active for later steps in this process)
    In the command line window type ‘ipconfig /all’
    A list of IP address information will be displayed
  2. Record the IP address currently assigned to this computer(IPv4 Address)
    Record the Subnet Mask
    Record the IP address of the Default Gateway
    Record the IP address of the DNS server(s)
  3. Change the IP address of your computer go to Start,Settings, Network and Dial up connections ? local area connection and click on properties.
    Click on Internet Protocol (TCP/IP) and then properties
  4. Click on the radio button ‘Use the following IP address:’
  5. Save these settings by clicking on ‘OK’ to all windows as you exit this configuration section.
  6. Connect the WebBox and the computer using Network cable.
  7. Testing if your WebBox is connected, by running the command ping 192.168.0.168
  8. Once you can successfully ping the WebBox start up Internet Explorer and in the browser window enter ‘http://192.168.0.168’; and you will then see the WebBox front page where you can login to the WebBox using the default password sma.
  9. When you are logged on go to the ‘WebBox /Settings/System’ screen and set the proper time, date and time zone
  10. Go to the ‘WebBox/Settings/Network’. Enter the Default Gateway, Subnet mask, and DNS server addresses that recorded at the beginning of this Quick Start Guide into the ‘Gateway address’, ‘Subnet mask’ and ‘DNS server address’ fields under the ‘static IP’ column.
  11. Enter an IP address for your WebBox, by changing last digit of the IP address you recorded at the begining of this guide. Ex: If your computer IP was 192.168.1.21 then slect a free IP address like 192.168.1.33 (You can checking if this IP were free by pinging it).
  12. Save then make sure to confirm
  13. Connect your WebBox again to your router, and get your laptop connected back as well to the Network.
  14. Try accessing the WebBox by typing in the new assigned IP address in your browser.

Bài viết được Solar SM biên dịch từ tài liệu kỹ thuật của SMA Solar Technology AG. Nếu sự cố chưa được giải quyết, hãy gửi yêu cầu hỗ trợ kỹ thuật hoặc gọi hotline 082 747 7272.