The yellow LED blinks 5 times
Device fault
The yellow fault LED lights up for 5 seconds when the fault occurs, and then starts emitting the following blink code:
3 seconds off and then 5 brief consecutive blinks. This code is emitted 3 times in succession. If after this the fault is still present, the fault signal starts over again.
Corrective measures
Please contact your installer or the SMA Solar Technology Service Line.
If possible, check for the exact error message in the display of the inverter or via communication.SMC 9000TL / 10000TL / 11000TL (-RP)
SMC 6000TL / 7000TL / 8000TL
SMC 7000HV (-11)
SMC 4600A / 5000A / 6000A (-11)
SMC 5000 / 6000
SB 3300TL HC / 4200TL HC / 5000TL HC
SB 3300TL / 4200TL / 5000TL(W) Multi-String
SB 3300 / 3800 (-11)
SB 2500 / 2800i / 3000
SB 1300TL-10 / 1600TL-10 / 2100TL
SB 700 / 1100(E) / 1100LV / 1200 / 1700(E)
SWR