If I no longer wish to use the Sunny Home Manager with the Stretch, how can I cancel the connection (pairing) between the two devices?
(jh) Procedure for deletion of the pairing between Sunny Home Manager and Plugwise Stretch:
- Reset Sunny Home Manager (e.g. use a paperclip to press the button through the reset hole on the rear until both LEDs flash red)
- Detect the Sunny Home Manager in the system in the Sunny Portal again (the PV system data is transferred by the Sunny Portal to the Sunny Home Manager again).
- The Sunny Home Manager then works without the Plugwise connection (if the Stretch is still accessible by the Sunny Home Manager, the pairing is also deleted on the Stretch side)
- Previously existing Plugwise radio-controlled sockets must be deleted in the portal if you subsequently do not wish to connect the Stretch with the Sunny Home Manager.
- If the Stretch is no longer accessible by the Sunny Home Manager, the Plugwise Stretch reset button can be pressed for 15 seconds (status LED glows red). Thus, the connection to the Sunny Home Manager is also deleted in the Stretch.